Electronics For Imaging Pi6500 Pro Bedienungsanleitung Seite 16

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 55
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 15
7823
TAUS0612779EN00
Solution ID
3
Solution Usage
Description
Fiery* X2e, are the Konica print drivers currently supported in a Microsoft* Windows 2000 environment?
Solution
Windows 2000 print drivers for the Z4, ZX and X2/X2e controllers are now available from the Konica FTP site [[(Internal Link for Faxing/Printing FTP site
information)| RUN V:\text\Wordpad.exe v:\text\CBC009.txt]] FTP_ user site.txt file [[(Internal Link for Faxing/Printing FTP_ user site.txt file information)| RUN
V:\text\Wordpad.exe v:\text\CBC010.txt]]
* Trademark ownership information
TAUS0613449EN00
Solution ID
3
Solution Usage
Description
No developer motor operation when in developer change mode.
Solution
CAUSE: Both developer unit jumper connectors are not connected.
SOLUTION: The 7823 Service Manual page D-131 incorrectly states that only the small connector should be plugged into the rear of the developer unit.
Both connectors must be plugged into the rear of the developer unit.
TAUS0614170EN00
Solution ID
3
Solution Usage
Description
The ATDC sensor adjust (auto) after changing developers does not complete.
Solution
CAUSE: The transfer drum is not locked.
SOLUTION: Ensure that the transfer drum lever is in the locked position before doing the ATDC adjustment.
TAUS0614575EN00
Solution ID
3
Solution Usage
Description
Blank display (no power).
Solution
CAUSE: PWB-I has failed.
SOLUTION: If RY2L and RY3L on PWB-L do not energize when the machine is plugged in, verify 24VDC at PJ1L-1 and PJ1L-2. If voltage is present and the
relays on PWB-L still do not energize, replace PWB-I (p/n 11UM-9180).
TAUS0614810EN00
Solution ID
3
Solution Usage
Description
Part number for the developer unit jumper harness that is used when changing developer.
Solution
There are two harnesses that can be used on the model 7823.
The 7823 jumper harness is (p/n 11UM00440). This harness is not compatible with the 7832.
The 7832 jumper harness (p/n 11ZT00440) is compatible with both models.
TAUS0615848EN00
Solution ID
3
Solution Usage
Description
16
Copyright 2006, Konica Minolta Business Solutions U.S.A., Inc.
October 2006
Seitenansicht 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 54 55

Kommentare zu diesen Handbüchern

Keine Kommentare